What is the best glue for Diecast Metal?

From Pace Industries: What is Diecasting?

"Die casting is a manufacturing process for producing accurately dimensioned, sharply defined, smooth or textured-surface metal parts. It is accomplished by forcing molten metal under high pressure into reusable metal dies. The process is often described as the shortest distance between raw material and finished product. The term “die casting” is also used to describe the finished part." (more at Pace Industries)

From diecast figurines, cars and trucks to your warhammer projects use Mister Glue. Epoxies will work but Mister Glue is simpler and faster and it dries clear. Fantastic if there is a clean break.

Clean both surfaces of dust and dirt then apply one or two drops to one side and press the two piecs firmly together. Almost instantly you have a permanent bond. Leave any glue that squeezes out for a few minutes and very gently scrape off the excess. Doing it this way will keep it from smearing. With Mister Glue the tighter the fit the better so you will have the minimum joint showing.

Keep Mister Glue handy for all of your projects as you can also use for wood and plastic. Mister Glue will easily bond unlike materials as well. Plastic to wood, wood to metal, and other combinations. It is very quick and much easier to use than an epoxy.

Use for your warhammer, model airplanes, cars and trucks as well as your model trains. If you are using with a model train set and have sets that are foam use Mister Glue here as well as there are no solvents. Because there are no solvents in this glue, it will not melt any kind of foam.

Buy Now!!

#misterglue #diecast